Bass Level; Surround - Martin Logan Motion Vision Guide De L'utilisateur

SUB > WIRED: This option configures the sound-
bar to use an external subwoofer connected via a
cable to the soundbar's Sub Out RCA connection.
Activate by pressing the right directional button
and the soundbar will respond with 'SET'. With
this option, the wireless sub transmitter is turned off.
Reference your subwoofer's manual to learn how to
properly adjust the sub's level and phase controls
to achieve proper blending with the soundbar. The
subwoofer's crossover should be set to "bypass" or
"LFE". For subwoofers that do not have a "bypass"
or "LFE" crossover setting, we recommend adjusting
the crossover to its highest setting.
SUB > WIRELS: [WIRELESS] Enter the 'SUB >
WIRELS' submenu by pressing the right directional
button. Here you can sync the soundbar with a
compatible wireless subwoofer.
Reference your subwoofer's manual to learn
how to properly adjust the sub's level and phase
controls to achieve proper blending with the sound-
bar. The subwoofer's crossover should be set to
"bypass" or "LFE". For subwoofers that do not have
a "bypass" or "LFE" crossover setting, we recom-
mend adjusting the crossover to its highest setting.
SUB > WIRELS > SYNC: This option will initi-
ate syncing with an SWT-2 equipped wireless
subwoofer. With this option, the soundbar's Sub
Out RCA connection is turned off. Please note:
MartinLogan subwoofers utilizing SWT-2 technol-
ogy will reference this wireless technology on their
connection panel. Please note: At one time
MartinLogan utilized a wireless subwoofer connec-
tion system named "SWT-1". Subwoofers equipped
with SWT-1 technology are NOT capable of wire-
less connectivity with this soundbar—although a
wired connection will work for these subwoofers.
Press the subwoofer's sync button and hold for 3
seconds. The sub's LED will blink quickly. Sync by
pressing the right directional button. The soundbar
will respond with 'PUSH.BTN'. Pairing of the sound-
bar and subwoofer may take up to 30 seconds.
If pairing has completed successfully, the sub's LED
will stop blinking and remain on and the soundbar
will display "SYNCED". If a link is not established,
the subwoofer's LED will start blinking slowly and the
soundbar will display "FAILED". Repeat if syncing fails.
SUB > WIRELS > TRN.OFF: [TURN OFF]
This option configures the soundbar to handle all
bass information and when selected will not out-
put information via the wired or wireless subwoofer
connections. Activate by pressing the right direc-
tional button and the soundbar will respond with
'OFF'. Activating this option performs the same
function as 'SUB > NO.SUB'.
MENU OPTION: BASS LEVEL
BASS.LV: [BASS LEVEL] Enter the 'BASS.LV' sub-
menu by pressing the right directional button. Here
you can configure bass output by ±10dB in incre-
ments of 2dB.
BASS.LV > –10 to +10: Using the up/down
directional buttons, choose the desired bass level (from
–10dB to +10dB). Bass level output will be automati-
cally set to match the value currently displayed.
MENU OPTION: SURROUND
SURRND: [SURROUND] Enter the 'SURRND'
submenu by pressing the right directional button.
This menu allows you to turn simulated surround
channels on or off when the soundbar detects a
multi-channel source.
SURRND > ON: [SURROUND ON] This option
configures the soundbar (when it detects 5.1-channel
19