Publicité
Les langues disponibles
Les langues disponibles
Function of Control Panel
1. Power on/off button
2. Temperature + button
3. Mode button
4. Timer on/off button
5. Temperature - button
6. Speed
7. Dehumidifier indicator
8. Cool mode indicator
9. Heat indicator
10. Connector window
11. Medium fan speed indicator
12. High fan speed indicator
13. Auto indicator
14. Low fan speed indicator
15. Led display
Function of Remote Control
1. Power (on/off button)
2. Mode (mode selector)
3. Timer (program button)
4. Speed (Fan speed selector)
5. Temp+ (Temperature selector up)
6. Temp- (Temperature selector down)
15
10
14
13
12
11
6
5
4
5
4
2
6
3
1
BEFORE THE FIRST USE
•
Place the unit in the correct upright position before unpacking.
•
Cut the two packing straps.
•
Slide the carton in an upwards motion and it will release from the base.
•
Grip the carry handles located on either sides of the unit and carefully
lift until it slides out of the foam base.
•
Install the exhaust hose on the unit before operating the unit.
•
Please ensure the unit is not placed against objects which will obstruct
9
air intake e.g. furniture or curtains as this will affect it's performance
8
dramatically.
•
Because the machine distributes hot air, please don't place or operate
7
in a narrow place.
•
Do not place the machine in full sun as it might shut down due to
3
overheat and the color of the machine may soon fade out.
2
•
Do not place the machine in a humid place.
1
•
For effective heating and cooling functions, please ensure that the
following steps are undertaken:
- Extend the exhaust hose to a length of not more than 400mm. The
exhaust hose must be kept parallel and must not be bent up or down.
- A distance of 500mm minimum must be kept between the filter side
of the unit and wall or any other obstacles.
•
Insert the power cord into an grounded AC220~240V/50Hz socket
•
This unit can evaporate the condensation and distribute through the
exhaust hose automatically.
Air conditioner
EN
7
Publicité
