Publicité
Les langues disponibles
Les langues disponibles
Wireless-G Broadband Router with SpeedBooster
8. Connect a standard Ethernet network cable to the Broadband Router's Internet port. Then, connect the other end of the
Ethernet cable to one of the numbered Ethernet ports on your other router.
9. Decide which network computers or Ethernet devices you want to connect to the Broadband Router.
IMPORTANT: Make sure you use the power
adapter that is supplied with the Router. Use of a
different power adapter could damage the Router.
Disconnect the selected computers or devices from the other router, and then connect them to the Broadband Router's
numbered ports using standard Ethernet network cabling.
10. Connect the AC power adapter to the Broadband Router's Power port and the other end into an electrical outlet. Only use
the power adapter supplied with the Broadband Router. Use of a different adapter may result in product damage.
Now that the hardware installation is complete, proceed to "Chapter 5: Configuring the Wireless-G
Broadband Router," for directions on using the Router's Web-Based Utility to configure the Router's
Chapter 2: Connecting the Wireless-G Broadband Router
Connecting One Router to Another
settings for your network.
Figure 2-6: The Router with the Internet Connection
is connected through the Internet Port
Figure 2-7: Connecting Your Network Devices
Figure 2-8: Connecting the Power
6
Publicité
