Publicité
Les langues disponibles
Les langues disponibles
Wireless-G Broadband Router with SpeedBooster
Chapter 1: Getting to Know the Wireless-G
Broadband Router
The Back Panel
The Router's ports, where the cables are connected, are located on the back panel.
Reset Button
There are two ways to reset the Router's factory defaults. Either press the Reset Button, for
approximately five seconds, or restore the defaults from the Administration tab - Factory
Defaults in the Router's Web-based Utility.
Internet
The Internet port is where you will connect your broadband Internet connection.
1, 2, 3, 4
These ports (1, 2, 3, 4) connect the Router to PCs on your wired network and other Ethernet
network devices.
Power
The Power port is where you will connect the power adapter.
Chapter 1: Getting to Know the Wireless-G Broadband Router
The Back Panel
Figure 1-1: The Router's Back Panel
IMPORTANT: Resetting the Router will erase
all of your settings (WEP Encryption, network
settings, etc.) and replace them with the
factory defaults. Do not reset the Router if you
want to retain these settings.
2
Publicité
