Scope Of Delivery; Parts Description; Technical Data; Safety Notes - LIVARNO LUX 55011 Instructions D'utilisation Et Consignes De Sécurité

Scope of delivery

1 LED desk lamp, Model 55011 (black) /
55012 (grey)
1 Connection cable
1 Mains adapter K05S050100G
1 Instructions for use

Parts description

LED lamp
1
Lamp head (flexible)
2
LC display
3
Touch switch
4
Connection socket (lamp)
5
Mode button
6
Select button
7
Cover (battery compartment)
8
/ buttons
9
Connection cable
10
Connection socket (mains adapter)
11
Mains adapter
12
Temperature display
13
Function display
14
Time display
15
Date display
16

Technical data

Item number:
Model:
Protection class (lamp):
Backup battery:
SMD LED:
Light colour:
Mains adapter:
Rated power:
Input voltage:
Input current:
Output voltage:
/ / /
55011 / 55012
LED table lamp with
LC-display
III /
3 V Lithium button cell
battery; type CR2032
(included, installed)
3.2 W
5500 K
K05S050100G
max. 6.8 W
100–240 V∼
50 / 60 Hz
0.2 A (max.)
5 V
Introduction / Safety notes
Output current:
Output:
Protection class:
Ambient temperature (ta): max. 45 °C
Housing temperature (tc): max. 79 °C

Safety notes

LIFE AND RISK OF ACCIDENT
FOR INFANTS AND CHILDREN!
This product may be used by children aged 12
years and older and persons with reduced phy-
sical, sensory or mental capabilities or lacking
experience and knowledge when supervised
or instructed in safe product use by a person
responsible for their safety. Do not allow child-
ren to play with the product. Cleaning and user
maintenance must not be performed by children
without supervision.
Keep children under age eight years away from
the light, the connection cable, and the mains
adapter.
Keep batteries out of the reach of children. Risk
of choking and suffocation.
Seek immediate medical attention if batteries are
swallowed by children or pets.
Never leave the lamp on unattended.
Do not allow children to play with the packaging
film. Children can get entangled in the packaging
whilst laying and suffocate.
DANGER OF ELECTRIC
SHOCK! Risk of electric shock due to faulty
electrical installation or excess line voltage.
Only connect the lamp if the mains voltage of
the socket corresponds with the specifications
in the type plate.
Always connect the lamp to an easy to reach
socket so the lamp can quickly be disconnected
from the mains in the event of a fault.
Do not use the lamp if you detect any type of
damage or the connection cable / mains adapter
is defective.
Do not open the housing; repairs must be car-
ried out by a professional. Contact a specialist
workshop for this purpose. Unauthorised repairs,
1.0 A
5 W
II /
DANGER TO
GB/IE 17