Frost Alert; Mould Indicator - ADE WS 1911 Mode D'emploi

Delete stored MAX/MIN values:
− Press and hold down the
3 seconds while the display is on until the displayed
MAX and MIN values for the temperature are deleted.

Frost alert

As soon as the outdoor sensor measures a temperature
between -1 °C and +3 °C (+30 °F to +37 °F), the frost
alarm symbol flashes on the display.
Pay attention to the following:
‚ Even if the frost alarm does not flash, there is always a
risk of frost or icing at temperatures around freezing
point. An outdoor sensor can only measure the local
temperature at the installation site.
‚ The flashing cannot be switched off. It stops
automatically as soon as the temperature is outside
the specified range.
‚ If you have connected several outdoor sensors to that of
the base station: Note which sensor (= note the channel
number on the display) triggered the frost alarm.

Mould indicator

The mould indicator ("MOLD" display) is made up of
temperature and humidity.
The indicator shows the likelihood of mould growth.
Possible displays: LO (low), ME (medium) and HI (high).
The mould indicator is available for indoor and outdoor areas.
WS 1911 weather station
button for approx.
77