Auto Stop Function; Use Projection - ADE WS 1911 Mode D'emploi

End alarm clock
− Press any button on the base station (except
to stop the alarm. After 24 hours, the alarm will be
triggered again.

Auto stop function

If you do not press a button, the alarm switches off
automatically after 2 minutes. After 24 hours, the alarm will
be triggered again.
Repeat alarm (snooze function)
− Press the
sounds.
The alarm signal stops according to the setting made
(default setting: 5 minutes). Then the device switches
back on and the alarm sounds again. This procedure
can be repeated multiple times.
− To exit snooze mode, press any button
(except
than 2 seconds.

Use projection

The projection only works if the room is sufficiently darkened.
1. Aim the projector at a wall or ceiling. Recommended
distance: 1 to 3 metres.
2. Slide the Projection switch to ON.
3. If necessary, press the
the wall or ceiling is inverted.
80
button once when the alarm signal
) or hold down
button if the projection on
for more
WS 1911 weather station
)