Wood Species And Storage; The Best Way To Burn Your Stove - WANDERS Kanda 85 Mode D'emploi Et Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

clean and cut logs, which have su ciently dried. Please see the list for drying times. Wet wood does not burn
well and gives heavy smoke emission. It may blacken the glass pane of your stove with soot and build up smut
in the ue pipe. This may increase the risk of chimney re.
Fresh, moist wood contains about 50% moisture. Cleaved wood still contains 20% moisture after drying it for
a year and moisture percentage will be decreased to 12 to 15% after drying it for two years. Dry wood gives
nice ames and little or no smoke, and the re will crackle when burning. Wet wood makes a hissing sound,
gives much smoke and only small ames which will considerably dampen the pleasure of burning your stove
and the heat output.
Do not put any para n-containing logs in your stove. When the door is closed, the high heat will
!
melt the para n from the logs too quickly. The polluted ue gasses which consequently develop will
deposit on and burn in the glass of your stove and cannot be removed later.
Do not use any wood that is painted, impregnated, glued together or processed in any other way. The
!
ue gases are very harmful to the environment and may a ect your stove. It is also prohibited to burn
plastics and other waste matter due to poisonous smoke development.

Wood species and storage

!
You can use all kinds of woods as fuel as long as it is clean, split and dry. Hardwood like oak, beech and
birch burn slowly, give o much heat and form charcoal easily. Softer woods like spruce, r and poplar
give more ames but less heat and less charcoal.
The best place to store timber is in a windy spot but sheltered from the rain. This is how the logs can
dry in a natural way. Pile the logs on an old pallet or a frame to let the wood dry from underneath and
to prevent the lower logs from being in contact with water.

The best way to burn your stove

All WANDERS' stoves are designed so that they give a maximum output. A well-lit wood-burning stove can
produce a yield of about 75%. This means that you need less wood for the same amount of heat. Moreover, a
well-lit stove produces less smoke pollution. Below are a few tips to give you optimum pleasure:
Always burn your stove with its door closed; this will improve the output within 8 to 10 times. When the
door of the stove is open, the chimney will draw more air than is needed for proper combustion. The rela-
tively cold air will cool the re. It will also preclude re damage by any sputtering sparks, especially from
softwood.
Do not put more than 3 logs on the re at one time. Too much fuel at one time thwarts e cient combus-
tion and burdens the environment unnecessarily.
Let extra air into your wood stove only when you start ring the hearth. A constant oversupply of air will
make the logs burn more rapidly while your hearth will not have enough time to give o its heat to the
room; if you overheat the stove, it may get damaged.
Ventilate the space well when you have the stove on. A crackling re has a minimum air consumption of 25
cubic metres an hour. Never put on your cooking hood when you have a stove burning in the same space.
Be careful with lighting the stove when it is foggy or when there is no wind outside. There is hardly any
draught in the cold chimney when the weather is calm. Since smoke is heavier than air there is the chance
of smoke streaming into the room. In foggy weather, the smoke from the chimney (outside) cools quickly
and may descend and become a nuisance in your neighbourhood.
Don't smother the re suddenly with water, but let it burn out. The materials inside the stove may deform
or crack as a result of sudden or great di erences in temperature.
21

Publicité

Table des Matières
loading

Table des Matières