LGB 199 031-6 Mogelin Manuel page 9

SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a
small amount of LGB Maintenance Oil (50019).
Replacing the light bulbs
Lower lights: Pull the lantern housing away from the model.
Remove and replace the bulb. Reassemble.
Upper lights: Remove the ring around the lantern lens. Ca-
refully pry the lens away from the lantern. Using tweezers,
remove and replace the bulb. Reassemble.
Cab light: Using tweezers, remove and replace the bulb.
Replacing the traction tire
• Use a small, straight-blade screwdriver to replace the
traction tire:
• Pry the old traction tire out of the wheel groove.
• Gently insert the new traction tire into the wheel groove.
• Make sure that the traction tire is seated properly in the
wheel groove.
9