SMA FLX Série Guide D'installation page 9

Setup
2.3.3 Data Warehouse
Upload
2 2
Illustration 2.3 Data Warehouse
Item
[0]
Upload time
Upload
[0]
interval
FTP server
[1]
address
FTP server
[1]
port
[1]
FTP mode
FTP server
[0]
username
[0]
Password
Start log
[0]
upload now
NOTICE
A prerequisite for a successful data transfer to the data
warehouse is a valid and active portal account. Receive
further details directly from the data warehouse/web
portal provider.
To register the inverter at a data warehouse provider, use
the final 10 digits of the master inverter serial number.
Find the serial number here: [Inverter level: Status →
Inverter], or on the product label on the side of the
inverter.
8
[0] [Plant]
/FTP Server
Description
Time of day for upload, used only when upload
interval is configured to 'daily'.
Hourly
Daily
Weekly
Monthly
Disabled
The FTP server address is user configurable as
a name or IP address. Enter maximum 24
characters.
Default port is 21.
Default mode is 'Active'.
Enter the username needed for the FTP/data
warehouse account.
If empty, the serial number of the inverter is
used. Enter maximum 24 characters.
The password for the FTP/web portal account.
Enter maximum 24 characters.
Tests the FTP upload immediately. To check
status go to [Plant → Status → Upload status].
L00410627-03_2q / Rev. date: 2014-06-20