Operation - Festo HGDS Série Notice D'utilisation

HGDS−...
8

Operation

Warning
Moving loads can injure persons and damage installations in the traversing
range (crushing, eye injuries).
Ensure the following in the movement area around the HGDS−...:
S
Nobody can reach into the operating direction of the moving components
(e.g. use a protective grid).
There are no foreign objects present (e.g. Allen key).
The position of the external end stops cannot be changed.
The load must be at a complete standstill before the HGDS−... can be touched.
Check the cushioning elements for the following signs of wear:
S
Cushioning element
Test cycle
Signs of wear
Replacement cycle
Fig. 18
The HGDS−... must not be allowed to come
S
into contact with
coolant with corrosive effect,
sanding dust,
incandescent sparks or chips
as they will damage it.
Observe the permissible values for
S
mass moment of inertia
swivel time as a function of mass moment of inertia.
36
Shock absorber
Every 2 million cycles
Oil leakage, hard impact; im
pact cap remains in retracted
end position / moves slowly
from end position
Every 10 million cycles
Rubber buffer
Every 5 million cycles
Loud noises
Every 10 million cycles
Fig. 19
Festo HGDS−... 0409a English