Festo HGDS Série Notice D'utilisation page 34

HGDS−...
S Take into consideration the following maximum cushioning element
settings.
Rotation
Anti−clockwise
Clockwise
Fig. 16
4. Screw in the cushioning element 4 using an Allen key. Correct deviations in
the end position by adjusting the screw−in depth of the cushioning element.
HGDS−...
Width across flats
Change in swivel angle per rotation
Max. tightening torque [Nm]
Fig. 17
5. Tighten the locking screw for the cushioning element once more
(see table in Fig. 17 for max. tightening torque).
34
Position
Until the internal stop is
reached (condition upon
delivery)
Until the notch is reached
(display window in protective
cover)
12
2
3.1°
0.3
16 20
2.5 3
2.8° 2.2°
0.8 1.2
Festo HGDS−... 0409a English