Ottobock 17LK3 Instructions D'utilisation page 14

► Inform the patient.
CAUTION
Excessive strain on load-bearing components
Injuries due to changes in or loss of functionality
► Only use the product for the defined area of application.
► If the product has been exposed to extreme strain (e.g. due to falling),
take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service etc.).
CAUTION
Incorrect alignment, assembly or adjustment
Injuries may result from incorrectly assembled, incorrectly adjusted or dam­
aged components
► Assembly, adjustment and maintenance operations may only be com­
pleted by qualified personnel.
► Observe the alignment, assembly and adjustment instructions.
► Inform the patient.
CAUTION
Mechanical damage to the product
Injuries due to changes in or loss of functionality
► Use caution when working with the product.
► Check the product for proper function and readiness for use.
► In case of changes in or loss of functionality, discontinue use of the
product and have it checked by authorised, qualified personnel.
CAUTION
Reaching into the area of the joint mechanism
Pinching of limbs (e.g. fingers) and the skin due to uncontrolled joint move­
ment
► Do not reach into the joint mechanism during daily use.
► Close attention is required during assembly and adjustment tasks.
► Inform the patient.
CAUTION
Excessive strain due to use on more than one patient
Risk of injury and loss of functionality as well as damage to the product
14 | Ottobock