Ottobock 17LK3 Instructions D'utilisation page 13

Item Component (see Fig. 1)
19 Temporary switch
20 Joint dummy
22 Countersunk head screw (Allen
screw)
The scope of delivery does NOT include:
Item Component (see Fig. 1)
21 Shoulder screw (part of 743R6 adjustment Set)
Item Component (see Fig. 2)
23 Joint bar
3 Application
3.1 Indications for use
The system knee joints are to be used exclusively for the orthotic fitting of
the lower limbs on a patient.
In case of unilateral use, the manufacturer recommends that the system
knee joint be processed by means of the lamination resin technique or car­
bon prepreg technology. When used bilaterally, there is no limitation on the
processing technology used.
3.2 Indications
Partial or total paralysis of the leg muscles.
4 Safety
4.1 Explanation of warning symbols
Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
4.2 General safety instructions
WARNING
Operation of motor vehicles
Risk of accidents due to restricted body function
► Observe the applicable legal and insurance regulations for the opera­
tion of motor vehicles and have your driving ability examined and certi­
fied by an authorised agency.
Joint
(17LK3=12/=14)
(17LK3=16/=20)
Article no.
170Y162=*
30Y268=*
501S41=M4x10
501S41=M5x12
Article no.
30Y89
Article no.
17LS3=*
Ottobock | 13