General Safety Instructions; Security Information; Directives And Declarations; Electromagnetic Compatibility - Siemens SIMATIC IPC847D Instructions De Service

IMPORTANT: Updated information for IPC847D

9.9 General safety instructions

9.9 General safety instructions
Update of section 2.1 in the operating instructions on the topic of industrial security.

Security information

Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions only form one element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines
and networks. Systems, machines and components should only be connected to the
enterprise network or the internet if and to the extent necessary and with appropriate security
measures (e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens' guidance on appropriate security measures should be taken into
account. You can find more information about Industrial Security at
(http://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends to apply product updates as soon as available and to
always use the latest product versions. Use of product versions that are no longer supported,
and failure to apply latest updates may increase customer's exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed at (https://support.industry.siemens.com).
9.10

Directives and declarations

Supplement to sections 8.2.1 and 8.2.2 of the operating instructions.

Electromagnetic compatibility

This product meets the requirements of EU Directive 2014/30/EU "Electromagnetic
Compatibility".
Low-voltage directive
The device with AC power supply complies with the requirements of the EU Directive
2014/35/EU "Low Voltage Directive".
Compliance with this standard has been verified according to EN 60950-1:2006 + A11:2009
+ A1:2010 + A12:2011 + AC:2011 + A2:2013.
274
Instructions de service, 03/2018, A5E32997459-AC
SIMATIC IPC847D