Using The Gui Remote Control; Gui Remote Control Operations - Yamaha DSP-Z9 Mode D'emploi

GUI remote control operations

The GUI (graphical user interface) remote control
provides a simple and convenient way to control this unit
while viewing a GUI display on your video monitor. You
can use the following steps to:
• Configure i.LINK connections
• Select and configure sound field programs
• Select and configure input sources
• Manually configure your system settings
• Automatically set up your system
• Protect your system settings
• Display information about audio and video signals
SYSTEM
POWER
1
2
TOP
1
Switch on this unit and your video monitor.
Make sure the GUI is displayed.
2
Press TOP.
The TOP display appears.

USING THE GUI REMOTE CONTROL

STANDBY
3-5
ENTER
6
EXIT
USING THE GUI REMOTE CONTROL
3
Press k/n repeatedly to select a category
(i.e., Manual Setup), then press h to enter
the selected category (i.e., Basic).
ENTER
ENTER
29