Using The Macro Feature - Yamaha DSP-Z9 Mode D'emploi

REMOTE CONTROL FEATURES

Using the macro feature

The macro feature makes it possible to perform a series of operations with the press of a single button. For example,
when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button
to start playback. The macro feature lets you perform all of these operations simply by pressing the CD macro button.
The buttons listed as macro buttons below are factory set with macro programs. You can also program your own macros
(see page 85).
Press a macro button
CD
Macro buttons
SYSTEM
POWER
V-AUX
TUNER
PHONO
CABLE
SAT
MD/TAPE
CD-R
CD
DTV/LD
VCR 1
VCR2
DVR
DVD
STANDBY
*1
You can turn on some components (including YAMAHA components) connected to this unit by connecting them to the AC
OUTLET(S) on the rear panel of this unit. (Power control may not be synchronized with this unit depending on the component. For
details, refer to the operation instructions for the connected component.)
*2
Playback can be started for any YAMAHA remote control-compatible MD recorder, CD player, CD recorder, DVD player, or LD
player. When using macros to operate other components, you will need to program the PLAY button on the control area of that
component (see pages 82 and 83) or set a manufacturer code (see page 81).
*3
When TUNER is selected as the input source, YAMAHA tuners will play the last station received before the unit was set to the
standby mode.
84
To automatically transmit these signals in order
SYSTEM
POWER
First Second
SYSTEM
POWER
(*1)
STANDBY
CD
PLAY
(CD area)
Third
(DTV/
POWER
—
LD area)
V-AUX
—
(*3)
TUNER
—
PHONO
—
CABLE
—
SAT
—
MD/TAPE PLAY
(MD/TAPE area) (*2)
CD-R PLAY
(CD-R area) (*2)
CD PLAY
(CD area) (*2)
DTV/LD
—
PLAY
VCR 1
(VCR 1 area) (*2)
PLAY
VCR2
(VCR 2 area) (*2)
PLAY
DVR
(DVR area) (*2)
DVD PLAY
(DVD area) (*2)
—
—