Getting Started; Checking The Package Contents; Installing Batteries In The Remote Control; Using The Remote Control - Yamaha DSP-AX2 Mode D'emploi

Checking the Package Contents

Check your package to make sure it has the following items.
Remote Control
When finding it difficult to fit this unit onto the shelf, remove the side panels after removing the screws tightened on the side panels. Put this
sticker to cover the screw holes after tearing off the back side of the sticker.

Installing Batteries in the Remote Control

Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity illustrations (+ and –) inside the
battery compartment.
Change the batteries periodically. Do not use old batteries together with new ones.
Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different
types of batteries may have the same shape and color.
Reset button

Using the Remote Control

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main
unit to operate. When the sensor is covered or there is a large object between the remote control and the main unit, the sensor cannot receive
signals. The sensor may not be able to receive signals properly when it is exposed to direct sunlight or a strong artificial light (such as a
fluorescent or strobe light). In this case, change the direction of the light or reposition the main unit to avoid direct lighting.
INPUT
INPUT MODE
NATURAL SOUND AV AMPLIFIER DSP-AX2
STANDBY
/ON
SPEAKERS
A B EFFECT
SOURCE
DVD MD/TAPE
D-TV/LD CD-R
SILENT
CABLE TUNER
S VIDEO VIDEO L AUDIO R OPTICAL
SAT CD
BASS PROCESSOR 6CH
EXTENSION DIRECT VCR 1 PHONO INPUT
PHONES VCR 2/DVR
VIDEO AUX
BASS TREBLE REC OUT DSP PROGRAM VIDEO AUX
Approximately 6m
30° 30°
(20 feet)

Getting Started

Alkaline Batteries (3) (LR6)
Quick Reference Card
Remote Control TUNER CD button (CD area)
Infrared window
POWER
CLEAR LEARN
RE-NAME MACRO
DISPLAY
TRANSMIT (Set 10KEY)
MACRO ON/OFF SEARCH
STANDBY
Skip Search
SYSTEM POWER A button
POWER STOP
Input buttons PLAY
PAUSE (/Stop)
Preset number 1 to 8
Numeric buttons 1 to 9
6CH INPUT
Display Preset group A through E from left.
CLEAR
Source selector Numeric button +10
Preset group A/B/C/D/E
Numeric button 0
LIGHT
DISC +/– (Disc Skip)
Operational buttons
Preset +/–
TV VOL +/–, TV INPUT, and TV MUTE
10 KEY/DSP
INDEX function if you have set up the
manufacturer code for the TV Area.
Sound program selector/ (Set 10KEY)
Numeric buttons
MUTE MD/TAPE button (MD area) CD-R button (CD-R area)
VOLUME +/–
Operational buttons
EFFECT
LEVEL
PARAMETER/SET MENU REC/PAUSE REC/PAUSE
ON SCREEN
POWER POWER
Cursor buttons
SLEEP
TEST DISPLAY
DISPLAY
SEARCH SEARCH
SOUND
Skip Search Skip Search
Cover
STOP STOP
PLAY PLAY
PAUSE PAUSE
Numeric buttons 1 to 9
Numeric buttons 1 to 9
Numeric button +10 Numeric button +10
Numeric button 0 Numeric button 0
TV VOL +/–, TV INPUT, and TV MUTE TV VOL +/–, TV INPUT, and TV MUTE
(Set 10KEY) function if you have set up the INDEX function if you have set up the
manufacturer code for the TV Area. manufacturer code for the TV Area.
(Set 10KEY)
V655120
Quick Reference Guide
About changing batteries
As the batteries wear out, the operating range of the remote control decreases and
the TRANSMIT indicator does not flash or its light becomes dim. When you
notice any of these conditions, change all of the batteries.
Notes:
• If the remote control is without batteries for more than 20 minutes, or if worn out
batteries remain in the unit, the contents of the memory may be cleared.
If the memory is cleared, insert new batteries and reprogram any functions that may have
been cleared.
• After you insert new batteries, be sure to push RESET in the battery compartment using
a ball point pen or similar object before using the remote control. (This does not clear the
contents of the memory.)
About handling the remote control
VOLUME
Handle the remote control with care.
Do not spill water or other liquids on the remote control.
Do not drop the remote control.
Do not leave or store the remote control in the following types of conditions:
• high humidity or temperature such as near a heater, stove or bath; or
• dusty places; or
• in places subject to extremely low temperatures.
Power Cord
(Europe model only)
R L
Side panel sticker
3