Utility Mode - Yamaha DTXPRESS III Mode D'emploi

Utility Mode

This mode sets general parameters for the DTXPRESS
III system and MIDI.
Enter the Utility Mode
Press the [UTIL] button on the front panel.
Once the Utility Mode is entered, the TG Group main page (Equal-
izer) shown below will be displayed.
UT TG MASTER
EQ Lo=+ 6 Hi=+ 0
What's in the Utility Mode
The Utility Mode is divided into the 6 sub-groups listed below.
1. TG (Tone Generator) Group ............. (mP. 29)
Contains various settings that apply to the
DTXPRESS III's tone generator.
2. SYSTEM Group ................................. (mP. 30)
Contains various settings that affect the entire
DTXPRESS III system.
3. MIDI Group ........................................ (mP. 31)
Contains various settings for the DTXPRESS III's
MIDI and TO HOST functions.
4. CLK (Click) Group ............................. (mP. 34)
Contains various settings for the DTXPRESS III's
Click Voice functions.
5. SEQ (Sequencer) Group .................. (mP. 36)
Contains various settings that apply to the
DTXPRESS III's sequencer (song).
6. MAP (Drum Map) Group ................... (mP. 37)
Used to edit the User Drum Map.
How to set...
1. Press the [UTIL] button to enter the Utility Mode.
2. Select the sub-mode.
• Press the [UTIL] button to move to the next sub group's main page.
• Use the [PAGE ], [PAGE ] buttons to move to page by page
within the selected sub group. You can use these buttons to
navigate through all of the pages (from the first System Group
main page to the last MAP Group page).
3. Use the [SEL<], [SEL>] buttons to move the cursor to
the setting you want to change. The value will flash.
* If there is only one parameter, it is not necessary to move the
cursor.
4. Use the [VALUE-] and [VALUE+] buttons to set the
parameter's value or ON/OFF setting.
Any settings made in the Utility Mode will directly change
the memory settings of the DTXPRESS III. There is no
store function in this mode.
28
Utility Mode Function List
1. TG (Tone Generator) Group ..................................... 28
1-1. Equalizer (EQ) ................................................. 29
1-2. Mute ................................................................ 29
1-3. Tuning .............................................................. 29
1-4. Volume ............................................................ 29
1-5. Reverb Bypass ................................................ 29
2. SYSTEM Group ......................................................... 30
2-1. Learn Mode ..................................................... 30
2-2. Trigger Bypass ................................................. 30
2-3. Volume Mode .................................................. 30
2-4. Jump to Recent Page ...................................... 30
2-5. Factory Set ...................................................... 31
3. MIDI Group ................................................................ 31
3-1. Bulk Dump ....................................................... 31
3-2. Channel 10 Program Change/
Channel Event Receive ................................... 32
3-3. Receive Program Change/
System Exclusive Messages ........................... 32
3-4. Program Change Table .................................... 33
3-5. MIDI Mode ....................................................... 33
3-6. Device Number, Local Control ......................... 33
3-7. MIDI Merge ...................................................... 33
3-8. Dump Interval .................................................. 34
3-9. Send Hi-Hat Control ........................................ 34
3-10. Host Thru Port ................................................. 34
4. CLK (Click) Group .................................................... 34
4-1. Click Voice Set ................................................. 34
4-2. Click Voice ....................................................... 34
4-3. Click Volume, Tuning ........................................ 35
4-4. Click Note Number .......................................... 35
4-5. Click Mode ....................................................... 35
4-6. Click Out Select ............................................... 35
5. SEQ (Sequencer) Group .......................................... 36
5-1. MIDI Control .................................................... 36
5-2. Count Switch ................................................... 36
5-3. Sync Mode ...................................................... 36
5-4. Use Tempo ...................................................... 36
6. MAP (Drum Map) Group ........................................... 37
6-1. Voice ................................................................ 37
6-2. Volume, Pan .................................................... 37
6-3. Tuning .............................................................. 37
6-4. Layer Balance .................................................. 38
6-5. Decay, Cutoff Frequency ................................. 38
6-6. Reverb Send .................................................... 38
6-7. Alternate Group, Key Assign Mode ................. 38
6-8. Key Off Enable ................................................ 39
6-9. Map Copy ........................................................ 39
Page