Yamaha DTXPRESS III Mode D'emploi page 5

Tone Generator
The DTXPRESS III's tone generator contains a total of 990 drum
and percussion voices.
Preset Drum Kits use an exclusive Drum Kit Map for each kit in
which voices for the kit are assigned to individual MIDI note num-
bers.
The User Drum Kit uses one drum map (User Drum Map) that is
common for all drum kit numbers 49-80. The Utility mode's [5.
Map (Drum Map)] group can be used to assign voices to each
MIDI note number (0-127) and edit the drum kit.
Along with the DTXPRESS III's drum and percussion voices, the
DTXPRESS III possesses a variety of keyboard voices (128 voices)
that are based on the GM System Level 1. It is possible to deliver
piano and brass voices by hitting the pad and playback songs with
the internal sequencer or from external sequencer data. A maxi-
mum of 32 voices can be delivered simultaneously.
Song Data
The DTXPRESS III contains 95 preset songs (No. 1-95) that con-
sist of not only drum parts but also keyboard, brass, etc., accom-
paniment parts.
You can enjoy the songs as they are or mute the song's drums or a
single drum voice (snare drum, etc.) and play along with the drum.
Also, you can record your performance to the User Song memory
(No. 96-127). Each song consists of two tracks and each track can
include data for MIDI channels 1-16.
MIDI/TO HOST Jacks
All drum kit setting data and sequencer data are managed with a
MIDI data.
By connecting the DTXPRESS III's MIDI OUT/IN jacks to the
MIDI IN/OUT jacks on an external MIDI device, MIDI data can
be exchanged. The TO/HOST jack is used to transmit and receive
MIDI data from a computer.
According to the MIDI data transmitted from an external MIDI
device or computer connected to the DTXPRESS III, drum kits
can be switched, the song can be controlled and the tone generator
can be sounded freely.
For example, song data (sequencer data) transmitted from an ex-
ternal sequencer to the DTXPRESS III's MIDI IN jack can be
used to play the voices produced by the DTXPRESS III's internal
tone generator. You can use the DTXPRESS III to play along with
these songs and record both external sequencer and DTXPRESS
III parts.
Also, MIDI data produced when the DTXPRESS III can be trans-
mitted to an external MIDI device and/or computer. Playing the
DTXPRESS III in this configuration allows you to trigger the ex-
ternal tone generator's voices and when a drum kit is switched,
have the external MIDI keyboard's voice change as well. The
DTXPRESS III's data can be stored to, as well as retrieved from
an external MIDI device.
DTXPRESS
Basic Operations for Data Setting
Enter the Modes
Press each Mode button or press while holding the [SHIFT] but-
ton.
• Drum Kit Play Mode ........................ [DRUMKIT]
• Trigger Setup Edit Mode ................. [SHIFT]+[TRIG]
• Utility Mode ..................................... [UTIL]
• Drum Kit Voice Edit Mode .............. [VOICE]
• Song Edit Mode ............................... [SHIFT]+[SONG]
Page Navigation
Press the [PAGEs] button to move to the previous page, the
[PAGEt] button to move to the next page. Hold the button to
scroll through the pages.
Select the Parameter
The flashing parameter on the display is specified for setting.
• Use the [SEL<] and [SEL>] buttons to move the cursor (the
flashing character or symbol).
The [SEL<] button moves the cursor to the left while the
[SEL>] moves the cursor to the right.
• When there is only one parameter on the display, the [SEL<]/
[SEL>] buttons will not operate.
Change the setting
The setting (value) of flashing parameter on the display can be
changed.
• The [VALUE–] and [VALUE+] buttons are used to set param-
eter values.
When setting values, press the [VALUE–] button to decrease
(minus) the value, press the [VALUE+] button to increase (plus)
the value. Holding the button will continue to decrease/increase
the value.
Hold the [VALUE–] and press the [VALUE+] button will de-
crease the value by 10. Continue to hold both buttons and the
value will continue to decrease.
Hold the [VALUE+] button and press the [VALUE–] button to
increase the value by 10. Continue to hold both buttons and the
value will continue to increase.
III Internal Makeup
5