Switch-Over Weighing Unit - KERN and SOHN PFB 120-3A Mode D'emploi

8.5 Switch-over weighing unit

How to enable weighing units:
 Switch on weighing scales and press and hold the MODE key during the self-test
until "F1 Unt" is shown on the screen.
 Press the ZERO key, the first weighing unit with the current setting will be
displayed.
 Press the MODE key to enable [on] / disable [off] the weighing unit.
 Use the ZERO key, to confirm. The next unit will be shown.
 Press the MODE key to enable [on] / disable [off] the displayed weighing unit.
 Use the ZERO key, to confirm. The next unit will be shown.
 Repeat sequence for each weighing unit.
Switch-over weighing unit:
Press the MODE key to switch the display in weighing mode to the previously
enabled weighing units.
20 PFB-BA-e-1741