Placing - KERN and SOHN PFB 120-3A Mode D'emploi

7.2.1 Placing

 Remove transport securing
(only models PFB 120-3A, PFB 200-3A, PFB 300-3A)
 Installation of weighing plate
The balance must be installed in a way that the weighing plate is exactly in
horizontal position.
 Install wind shield
(only models PFB 120-3A, PFB 200-3 A, PFB 300-3 A, PFB 1200-2A,
PFB 2000-2A, PFB 3000-2A)
 Levelling
Exact alignment and stable installation are an essential requirement for
repeatable results. You can compensate for minor unevenness or tilts of the
footprint by levelling the weighing balance.
Level balance with foot screws until the air bubble of the
water balance is in the prescribed circle.
PFB-BA-e-1741 13