9.3 Totalization
9.3.1 Manual totalizing
With this function the individual weighing values are added into the summation
memory by pressing the PRINT key and edited when an optional printer is
connected.
• For menu settings, see chapter 10.3:
„F3 COM" „S 232" „P Prt"
„F4 Acc" „on"
• The totalizing function is not active when the weight is under 20d.
Add up:
Place item to be weighed A, e.g. 100 g.
Wait for stability display, then press the PRINT key. The weight value will be
saved and printed if an optional printer is connected. The number of weighings,
followed by the total weight will be indicated.
Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
24
PFB-BA-e-1741