Troubleshooting; Technical Specifications - Reloop CONTOUR Controller Edition Mode D'emploi

7.3 TROUBLEshOOTING

If any problem should arise while using Reloop Contour the following chart is the first drop-in
center:
sYMPTOMs
The device does not receive any power
when turning it on via the ON/OFF Button
-B34-.
The controller's LEDs are only weakly lit
and the device does not react.
The DJ software does not show any reac-
tion to the usage of any of the contoller's
control elements.
A problem occurs that is not listed in this
chart.

7.4 TEChNICAL sPECIFICATIONs

The following specifications are not verified by Global Distribution GmbH in terms of plausibility
and accuracy:
Power Source USB 5V 500mA / DC: 6V, 1.5A; User Selectable
(mains adapter optionally available)
Dimensions 160 x 376 x 63.35 mm
Weight 1.92 kg
POssIBLE CAUsEs
USB cord or mains adapter are not correctly
connected.
The power supply is not sufficient.
Traktor LE is not configured corectly.
Traktor Pro is not configured correctly.
Various causes.
CORRECTIvE MEAsUREs
Check whether the USB cord is correctly connected
to a free USB port of your computer and Contour's
USB port -B38-. Please also check whether the mains
adapter is connected correctly to the mains connection
-B36-.
Connect your computer to a secured power line. Also it
is necessary to connect the included mains adapter to
the corresponding jack -B36-.
Use the included Traktor LE version, start the Setup Wi-
zard again. Refer to the paragraph „Traktor LE Setup"
in the chapter „Computer Configuration".
When using Traktor Pro the mapping has to be loaded
again. To do so follow the instructions in the paragraph
„Trakto Pro Configuration" in the chapter „Computer
Configuration".
Visit www.reloopdj.com/forum, in order to get support
regarding your Reloop products.
33