Reloop CONTOUR Controller Edition Mode D'emploi page 27

ELEmENt FuNctION
T22 Beat Jump Forward
Carries out a beat jump in the playback
direction.
T23 Hot cue Bank Select
Selects the desired hot cue bank. If
„1-4" is pressed, the hot cue points 1-4
can be controlled in Traktor. Shortly
pressing „5-8" facilitates the control of
hot cues 5-8 via the Hot Cue Buttons
-T24-.
T24 Hot cue Buttons
Herewith it is possible to control the 8
hot cues of a track in Traktor. Depen-
ding on which bank is currently active
(see -T23-) hot cues 1-4 and 5-8 respec-
tively can be controlled.
If a hot cue is not occupied (no LED
feedback), this hot cue will be assigned
to the current track position by pres-
sing one of the pads.
T25 Hot cue Save Button
If this element is pressed, the current
track position is saved on a free hot
cue.
T26 Hot cue delete Button
While this button is being pressed and
held the saved hot cue points can be
deleted by pressing the corresponding
hot cue pads -T24-. The LED of the
corresponding pad will go out.
Afterwards release the Delete Button in
order to leave delete mode.
T27 Jog wheel mode Buttons
There are 5 modes at your disposal which
determine the Jog Wheel's -T28- function:
ScratcH If this mode is active, the current
track can be scratched as long as the Jog
Wheel's surface -T28- is being touched. If only
the side is being touched and the Jog Wheel
is being moved, you can increase (clockwise)
or decrease (counterclockwise) the current
track's speed. pItcHB(ENd) Herewith you
can increase (clockwise) or decrease (coun-
terclockwise) the current track's speed. As
opposed to SCRATCH mode the Jog Wheel's
-T28- rotational speed also has an influence
on the track's manipulation. SEarcH
Allows scrolling quickly through a loaded
track. traX By activating this mode Traktor
automatically switches to browse view. By
turning the Jog Wheel -T28- it is now possible
to comfortably navigate the track list. A full
navigation through the folder directory as
well as the track directory is possible via the
TRAX Encoder -T5-.
NO SELEctEd mOdE
If no mode has been selected, the Jog Wheel
-T28- can be used for volume control of a
deck (Rotary Deck Volume Control). If the
Jog Wheel's surface is touched during the
rotation, the deck can be quickly faded in
and out. If only the rubberized edge is being
touched for the rotary movement, the deck
volume can be adjusted exactly.
NOtE!
the last mode is only important for
traktor's Internal mode.
FuNctION wItH actIvatEd SHIFt -t29-
right-Sided GrId-Shift
Shifts the grid that Traktor puts over the bass
line a step to the right.
Jog wheel mode Buttons
In Shift mode there is a mode at your disposal
that determines the Jog Wheel's -T28- func-
tion.
traX
By turning the Jog Wheel -T28- while holding
the Shift Button simultaneously the navigation
will be significantly accelerated. Also quick
search for a track will be facilitated.
27