Setup - Reloop CONTOUR Controller Edition Mode D'emploi

application that does not comply with the specifi ed purpose harbours risks such as short circuit,
fi re, electrical shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the warran-
ty rights.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the mains cord or the casing, as
well as for wearout of wear parts such as rotary knobs and sliding faders.
- If it is to be assumed that a safe operation is no longer feasible then the device must be discon-
nected and secured against accidental use. Always disconnect the mains plug from the outlet!
- It must be assumed that a safe operation is no longer feasible if the device bears visible defects,
if the device no longer functions, following longer storage under unfavourable conditions or after
major transport stress.

1. sETUP

T1 T2 T3 T4
T7
T8
T11
T15
T19
T23
T27
T29
20
T5 T6
T12 T13 T14
T16 T17 T18
T20 T21 T22
T24 T24
T28
T30 T31 T32 T33
T9
T10
T25
T26
B35
B34
B36
B37
B38