Hold either button down for 1 second to change
times rapidly.
3. To add another start time to the station, press the
button. The start time icon and start time number will
be flashing. Use the
start time number.
4. Press the
button. The start time will be flashing.
Use the
or
buttons to change the start time.
5. To program start times for another station, press the
button. The station number will be flashing. Use the
or
buttons to select the next station (1 through 4).
Repeat steps 3 and 4.
Eliminating a Start Time
With the display in the watering Start Time mode, push the
or
buttons until you reach 12:00
here push the
button once to reach the OFF position.
NOTE: If a station has all 9 start times turned
off, then the station is off.
Setting the Run Time (Length of Watering)
1. Press the
button until the Run Time icon
or
buttons to change the
(midnight). From
AM
is displayed.
2. The display will show the last run time entered.
3. Use the
or
button to change the station run time
on the display from 1 minute to 4 hours.
4. Press the
button to navigate to the next station
number to be programmed.
Setting Days to Water
1. Push the
button until the Water Days icon
displayed. The station number will also be displayed.
2. The controller will display seven days of the week with a
icon or a
icon above the numbered day. The
would represent an "On" water day, while the
would represent an "Off" watering day.
3. Use the
button to navigate to the next station to
be programmed.
Selecting Specific Days of the Week to Water
1. With the
cursor on a specific day (the cursor always
starts with day 1), press the
day of the week to water. Press the
watering for that day. After pressing a button the cursor
automatically advances to the next day.
2. Repeat step 1 until all desired days have been selected.
ENG
is
icon
icon
button to activate that
button to cancel
9