Effects; Flanger; Delay; Echo - Reloop RMX-80 DIGITAL Mode D'emploi

3.3 effeCtS

3.3.1 flanger

The Flanger is a classic DJ effect. First the input signal is divided in two signal paths that are then added with a time lag to a mixing step.
Level Depth:
Adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
Time Encoder:
Steplessly adjusts the time lag of a pass in steps of a millisecond.
If you press and hold the Time Encoder, steps of 10 milliseconds will be carried out.
(100 ms – 16,000 ms)
Time Bar Buttons:
Gradually adjust the time lag of a pass.
1-1; 2-1; 4-1; 8-1; 16-1.

3.3.2 delay

The Delay effect produces a delayed copy of the original source signal and adds it to the original signal.
Level Depth:
Adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
Time Encoder:
Steplessly adjusts the time lag in steps of a millisecond.
If you press and hold the Time Encoder, steps of 50 milliseconds will be carried out.
(2 ms – 4,000 ms)
Time Bar Buttons:
Gradually adjust the time lag of a pass.
1-4; 1-2; 3-4; 1-1; 2-1; 4-1.

3.3.3 eChO

The Echo effect produces several copies of the original source signal and adds them to the original signal.
Level Depth:
Adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
Time Encoder:
Steplessly adjusts the time lag in steps of a millisecond.
If you press and hold the Time Encoder, steps of 50 milliseconds will be carried out.
(2 ms – 4,000 ms)
Time Bar Buttons:
Gradually adjust the time lag.
1-4; 1-2; 3-4;1-1;2-1;4-1.

3.3.4 rEVErb

The Reverb effect produces a stereophonic sound. The original sound seems to move away from the listener.
Level Depth:
Steplessly adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
Time Encoder:
Adjusts the time lag, namely the virtual room's size in steps of 1.
If you press and hold the Time Encoder, steps of 10 will be carried out (1-100).
Time Bar Buttons:
Gradually adjust the time lag, namely the virtual room's size.
0; 25; 50; 75; 90; 100.

3.3.5 tranSfOrMer

The Transformer rhythmically fades the signal in and out.
Level Depth:
Steplessly adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
Time Encoder:
Steplessly adjusts the time lag between Fade In – Fade Out in steps of a millisecond.
If you press and hold the Time Encoder, steps of 50 milliseconds will be carried out.
(100 ms – 16,000 ms)
Time Bar Buttons:
Gradually adjust the time lag between Fade In and Fade Out.
1-8; 1-4; 1-2; 1-1; 2-1; 4-1.
18