Extended Heating Operation - Heat Mode - Comfort Functions - LOHBERGER INDALO Manuel D'utilisation Avec Instructions De Montage

EXTENDED HEATING OPERATION – HEAT MODE – COMFORT FUNCTIONS
In addition to the basic functions of simple heating operation, the LOHBERGER pellet stove provides extra comfort functions. However, be-
fore you can use the comfort functions such as frost protection, installation of an external room thermostat, regulation of the stove mobile
telephone, child safety device, you have to change from simple hating to comfort mode.
Display panel
Display of respective
operating status
Depress key
for at least 2
seconds (until
change in display
is visible)
(change in 5 % increments).
Key Display Description
EASY OFF
Standard display for stove switched off in simple heating mode.
Pressing
Menü
HEAT OFF
Standard display for stove switched off in extended heating mode. (comfort functions can now be selected)
Pressing
Menü
You can select one of three possible stove comfort functions. (the menu item Mode is only active in connection with the
MODE
room sensor or the wireless room sensor active).
Pressing
tions using keys
HEAT AUTO
Pressing
ROOM
36
Switch between EASY and HEAT modes
Press Menu key for at least 5 seconds.
Menu
+ -
Change heat output by
pressing the + or – key
for at least 5 seconds changes to HEAT mode. The change is also shown in the display as confirmation.
Menü
once changes to display MODE
Menü
once takes you to the comfort function selection and you can change between the individual comfort func-
+ and - .
again confirms the comfort function currently visible HEAT, AUTO or ROOM.
English
Menu
+ -
Change heat output by
pressing the + or – key
(change in 5 % increments).
Comfort functions
Menu item Mode only active in
connection with the LOHBERGER
room sensoror the LOHBERGER
wireless room sensor.
- +
- +
Selection of comfort function
required HEAT/AUTO/ROOM
by pressing the I/O key.