Stand-By Pumps; Faults - Causes And Solutions - Xylem Vogel Pumpen LR Serie Instructions De Montage, De Service Et De Maintenance

Installation, Operating and Maintenance Instruction
Part name
______________________________________________________________
Sectional drawing
___________________________________________________
All the information is given in the data sheet and the
relevant sectional drawing.
Store spare parts in dry and clean rooms.

9.2 Stand-by pumps

It is essential that a sufficient number of stand-
by pumps are kept ready for use in plants where
failure of a pump could endanger human life or
cause damage to property or high costs.
Regular checks should be carried out to ensure
that such pumps are always ready for use (see
Point 6.8).
Store stand-by pumps according to point 6.8.

10. Faults - Causes and Solutions

The following notes on causes of faults and how to
repair them are intended as an aid to recognising the
problem. The manufacturer's
Department is available to help repair faults that the
operator cannot or does not want to repair. If the
operator repairs or changes the pump, the design data
on the data sheet and chapter 2 of these Operating
Instructions should be particularly taken into account.
If necessary, the
manufacturer must be obtained.
Customer Service
written agreement of the
page 50
Model LR, LMR, LRZ, LMZ