Repairs; Spare Parts, Reserve Pumps; Spare Parts; Reserve Pumps - Xylem LOWARA TVS Série Instructions De Montage, De Service Et De Maintenance

Pompes immergees
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Installation, Operating and Maintenance Instruction

10. Repairs

Repairs to the pump or pump system may only
be carried out by authorized skilled personnel or
by the manufacturer's specialist staff.
Trained Customer Service engineers are available to
assist with installation and repair work on request.

11. Spare parts, Reserve pumps

11.1 Spare parts

Spare parts should be selected to last for two years of
continuous operation. If no other guidelines are
applicable we recommend that you stock the number
of parts listed below (in accordance with DIN 24296).
Spare Parts
Impeller
Guide wheel or multi-stage
casing
Joints for pump casing
Bearing bush
Bushing (if present)
Shaft + coupling
Non-return valve
Other joints
P = Number of pumps (incl. stand-by pumps)
Ordering spare parts
When ordering spare parts, please supply the following
information:
Type:
______________________________________________________________________
Order no.:
_______________________________________________________________
Sectional drawing:
__________________________________________________
Part designation:
_____________________________________________________
All the information is given in the relevant sectional
drawing.

11.2 Reserve pumps

It is essential that a sufficient number of stand-by
pumps are kept ready for use in plants where
failure of a pump could endanger human life or
cause damage to property or high costs. Regular
checks should be carried out to ensure that such
pumps are always ready for use (see Point 8).
Number of Spare Parts
1 - 2
3
1 x N
1 x N
0,5 x N
0,5 x N
4
6
sets
sets
2
2
2
2
1
1
1
1
sets
4
6
When removing the pump or the motor, you must
comply with Point 1.4 "Safety instructions", Point 3.1
"Transport, Handling" and Point 6.3 "Shutting down".
To ensure optimum availability, we recommend
that suitable quantities of spare parts are held in
stock, especially if these are made from special
materials because of the longer delivery times.
P
4
5
1 x N
2 x N
0,5 x N
1 x N
8
8
2
3
2
3
2
2
2
2
8
8
N = Number of steps
page 35
Model TVS
6 - 7
8 - 9
10/more
2 x N
3 x N
0,3 x N x P
1 x N
1,5 x N
0,15 x N x P
9
12
0,15 x N x P
3
4
0,5 x N x P
3
4
0,3 x N x P
2
3
0,3 x N x P
2
3
0,3 x N x P
9
10
1 x N x P

Publicité

Table des Matières
loading

Table des Matières