Funktel D11 Guide Utilisateur page 200

Messaging
Calling up and reading a message from the Integral 55 system message
list (see also instructions on page 193)
Call up the system service of the system either by using the
arrow] or with a long keystroke on the [0] key, then ...
use the
ROCKER SWITCH
use the rocker switch [Up / Down arrow] to open the «Mail List», ..
use the
ROCKER SWITCH
to display and read the entry in full, if required.
Display of longer messages when calling up the message via the system
service of the Integral 55.
(Message from the system message list of the Integral 55 Mobility
Server)
If the message consists of more than 16 characters it is not displayed in totality
when called up by means of the system service of the Mobility Server. It first
appears in abbreviated form in the 1st text line. You can still have a message
with a maximum length of 32 characters be displayed.
#
A long keystroke on the hash key. Instead of the date, the remainder of the
message appears in the 2nd text line.
If the received message is longer than 32 characters, the message is cut off
after the 31st character. The 32nd character is a stop, to indicate that a part of
the message has been cut off.
Handset message list (Mail Memory)
The most recent messages to have arrived are saved in the «Msg.Input» mes-
sage list of the handset. We recommend accessing the menu on the handset
message list in the general mode (idle display) of the handset.
#
Menu > Message Lists > Incoming Message, then ...
200
[Up / Down arrow] to call up the «Mail List», ...
[Up / Down arrow] to select an entry, ...
D11 / FC11
[Up
ROCKER SWITCH