Funktel D11 Guide Utilisateur page 177

D11 / FC11
Opening the Menu «Call diversion», setting up call diversion (Forts.)
Handset on the Integral 55
Enabling / disabling standard call diver-
sion
Navigate to either the entry "Set up call
diversion" or "Erase call diversion".
Confirm with a keystroke on the
[OK].
SOFTKEY
The relevant heading «Set up call di-
version» or «Erase call diversion» ap-
pears in the header of the display.
Select the diversion type that you wish
to set up or disable.
Confirm with a keystroke on the
[OK].
SOFTKEY
If you have selected the disable func-
tion, it is executed.
In all other cases:
Wait until the input field for the num-
ber appears in the display.
Enter the number to which incoming
calls must be diverted.
Confirm with the
RIGHT
RIGHT
[OK].
RIGHT SOFTKEY
The telephone functions
Handset on the DoIP (f.airnet system)
Setting up call diversion
Navigate to either the
icon.
The heading «On all calls», «On busy»
or «On no reply» appears in the header
of the display.
Confirm with a keystroke on the
[OK].
SOFTKEY
Navigate to either the «Internal calls»
or «External calls» entry
Confirm with a keystroke on the
[OK].
SOFTKEY
Wait until the line with the checkbox for
enabling / disabling
well as the input line appears in the
display.
Navigate to the line with the checkbox
and enable / disable the call diversion
with the
LEFT SOFTKEY
Navigate to the input line for the num-
ber and enter the number, to which the
incoming calls must be diverted.
Confirm with the
[Options] and end with [OK] for
SOFTKEY
«Cancel» or «Save».
, or
RIGHT
RIGHT
b
call diversion as
[Change].
RIGHT
177