Preconfigured Signalling Patterns For Messages - Funktel D11 Guide Utilisateur

D11 / FC11

Preconfigured signalling patterns for messages

Ten signalling patterns are available for message transmission (receiving mes-
sages, sending messages). These signalling patterns belong to 10 call types
with various priorities.
Table 1 lists the basic signalling patterns that are available on systems with
the Integral 55 Mobility Server as well as systems with the f.airnet DoIP Mobil-
ity Server.
Table 2 lists further signalling patterns that are available in addition to the ba-
sic signalling patterns on systems with the f.airnet DoIP Mobility Server.
Table 1
Signalling patterns for messages when operating
a D11 on an Integral 55 and on a f.airnet (DoIP) system
Call priority
Message button
(WebNet-Client)
Call characteris-
tics
Designation of the
call type
Signal tone
Signal volume
(Level 1 to 7)
Signalling duration
in [s]
Priority 0 Priority 1
|
Silent call Short call
Mute 1 Beep
not applica- Level 7
ble
not applica- 10 s
ble
Priority 2
| |
Normal call Alarm call
3 Beeps
Level 2
10 s
Messaging
Priority 3 Priority 4
|
Call with re-
ceipt re-
quest
Changing Acknowl-
tone se- edgement
quence request
tone
Level 3 Level 4
10 s Until ac-
knowledge-
ment takes
place
|
195