Funktel D11 Guide Utilisateur page 143

D11 / FC11
A D11 / FC11 with an FC4 or IH4 MEM card inserted can log in to a
further system-compatible telecommunication system at any time, as
you are accustomed with an FC4 or IH4.
When removing the D3, FC1, FC4 or IH4 MEM Card from the D11, ...
The D11 assumes its own identity and its own IPEI once more for operation
without a MEM card.
At this time uses the telephone directory entries present in the memory of
the D11. These entries comprise the copied telephone directory entries of
the D3 or FC1 MEM card as well as the manual additions / changes that
have been performed on the D11 with a D3 or FC1 MEM Card in the mean-
time.
Note: Entries from the telephone directory on the FC4- or IH4 MEM card as
well as manual changes / additions that have been made on a D11 with an
FC4 or IH4 MEM card are located only on the FC4- / IH4 MEM card! They
are not available for the D11 without a MEM card!
When the D3, FC1, FC4 or IH4 MEM Card is removed from the FC11, ...
The FC11 loses its identity as it does not have its own IPEI. The FC11 can
only be operated with a system-compatible MEM card.
Starting up
143