Connecting To A Computer - ACteon SOPROLIFE Manuel D'utilisation

CONNECTING TO A COMPUTER

7.1. REQUIRED CONFIGURATION FOR THE COMPUTER
To use the SOPROLIFE system, you must make sure the computer and its peripherals do not have any usage
limitation that could concern personal safety. It should also meet the following requirements:
Operating system
Processor
Memory
Hard disk
USB ports
Video board
USB Chipset
Screen resolution
Standard
7.2. DOCK M_USB2 CONNECTION
• Connect the USB cable between the connection box and one of the computer USB ports.
• Connect the connecting cable between the connection box and the handpiece.
• If you prefer using a footswitch rather than SoproTouch
the footswitch (optional) to the connection box. With this configuration, SoproTouch
• Connect the power supply to the outlet, and then, to the connection box (the green indicator light should be on).
7.3. DOCK MU_USB2 CONNECTION
• Refer to DOCK MU_USB 2 integration manual.
• Connect the connecting cable to the handpiece.
• Connect the USB cable between the connection box and one of the computer USB ports.
7.4. DOCK USB2 CONNECTION
• Connect the USB cable to one of the computer USB ports.
• Connect the connecting cable to the handpiece.
E N G L I S H
Minimal configuration
Windows 2000 Pro SP4 - XP Pro SP1
Intel® Pentium III – 500 MHz
512 MB
20 GB
2 x USB2.0 Hi-Speed ports
Graphic board 32 MB of unshared
video RAM compatible with DirectX 9
Intel or NEC
1024 x 768
IEC 60950
7
Recommended configuration
Windows XP Pro SP3 - VISTA Business SP1
Intel® Core 2
2 GB
160 GB
4 x UB 2.0 Hi-Speed ports
Graphic board with Nvidia chipset or exclusive
video ATI / 256 MB of unshared video RAM
compatible with DirectX 9 or higher.
Intel or NEC
1024 x 768 or higher
IEC 60601-1
to freeze the image, you just have to connect
S O P R O L I F E • U s e r ' s m a n u a l
is inhibited.
13