Programming Display - Tecno-gaz ONYX B 7.0 Mode D'emploi

9
From the first page press
00:00
00/00/1900
00:00
00/00/1900
v
Press to confirm selected values and go back to the setup menu
▬
Press to restart the procedure
X
Press to cancel selected values and go back to the setup menu
After the printer installation (optional accessory), is possible to print the traceability
adhesive labels to be stuck on the wrap before starting sterilization is entered.
▲
▬

PROGRAMMING DISPLAY

Setup to enter the autoclave setup menu.
LANGUAGE
Press the central button to change the language of menus
and vocal messages.
Press the arrow to shift to the next item
DATE AND TIME
Press the central button to enter the date/time setup.
When the box flashes press the arrows to select the
desired value.
Press once more the central button to move among
boxes and the arrows to select a value.
Go on until the last value is selected.
Press the central button for the last time to display the
final selection page.
EXTERNAL PRINTER
00
▼
Press the central button to move to the next selection.
When the box flashes press the arrows to
select the number of labels to be printed.
ENGLISH
15