Unpackaging - Tecno-gaz ONYX B 7.0 Mode D'emploi

ENGLISH
B-M1 Multifunction push button 1
B-M2 Multifunction push button 2
B-M3
Multifunction push button 3
PUMP
Push button for filling up of water
WATER
SELECT
Push button for selection of cycle
CYCLE
06
The autoclave is shipped in a suitable package to be transported and moved easily and
to protect its contents.
The packaging must not be subject to impact, must be handled with care and avoid
dropping it or roll it.
In case autonomous handling means are not available handle the packaged autoclave
always in two persons.
Autoclave is placed on wooden pallet and packed with corrugated cardboard internal
and external application.
For remove the autoclave to its pack please remove first the corrugated cardboard. For
lift the autoclave please use the belts.
The autoclave shall have to be handled by at least two people and by using belts
only.
Do not lift the autoclave from the inferior part of the door or command panel, this
incorrect operation can create problems of a mechanical nature.
ATTENTION: Always conserve original packaging.
All'interno the package you will find the following documents:
• USER'S MANUAL: to be read with attention and kept in a place available to all
operators assigned to sterilization.
• CERTIFICATION: which must be conserved.
• INSTALLATION REPORT - TESTING AND GUARANTEE CONDITIONS: must be
completed upon installation of the machine following the instructions indicated on the
form.
• QUICK USE GUIDE: should be kept in the vicinity of the machine.
• CERTIFICATION OF SAFETY WALVE.
8

UNPACKAGING