Tecno-gaz ONYX B 7.0 Mode D'emploi page 83

ENGLISH
Cleaning of the door gasket Every 20 cycles or once a week
Periodically remove eventual residuals which are deposited on the circumference of the
seal (spare code DANA038) using water and the sponge provided (non abrasive side), or
else a moistened cloth.
Door regulation Every 2 mouths
To regulate the door lock pressure, it is necessary to adjust the regulato of the same door
using the double function wrench (extraction tray + wrench) (Fig.3) provided (spare code
DANA008). Turn anti clockwise (pos.A) to increase lock pressure. Turn clockwise (pos.B)
to decrease the lock pressure.
A B
37