In The Box; You May Also Need; How The System Works - Petsafe PIG19-16413 Manuel D'utilisation

In the Box

Fence Transmitter
Power
Adaptor
Mounting

You May Also Need

• Additional wire and flags (Part #PRFA-500)
• Additional wire nuts
• Additional gel-filled capsules
• Drill and mounting hardware
• Tape measure
• Small cross-head screwdriver
• Pliers
• Staple gun
For setup and training help please visit www.petsafe.com.

How the System Works

A signal travels from the fence transmitter through a buried wire, marking the boundaries you wish to set for your
pet. Your pet wears a receiver collar that detects the signal at the boundary. As your pet approaches the boundary,
the receiver issues a warning tone. If he proceeds further, he receives a safe but startling static stimulation. While
harmless, the stimulation will persuade him to stay in the containment area you have established. Boundary flags are
a temporary visual aid for your pet; remove them after training. This PetSafe
has been proven safe, comfortable and effective for pets over 2.3 kg.
Test Light
Tool
Long
Contact Points
Boundary Wire
Bracket
Receiver
Charger
Receiver Collar with
Short Contact Points
Wire Nuts
• Scissors
• Lighter
• Shovel or lawn edger
• Wire stripping pliers
• Waterproofing compound (e.g. silicone caulk)
• PVC pipe or hose pipe
• Circular saw with masonry blade
• Non-metallic collar and lead
Rechargeable In-Ground Fence
®
petsafe.com
Gel-filled
Capsules
Boundary
Flags
(50)
System
™
5