In The Box; You May Also Need; How The System Works - Petsafe PIG19-16412 Manuel D'utilisation

In the Box

Fence Transmitter
Power
Adaptor

You May Also Need

• Additional wire and flags (Part #PRFA-500)
• Additional wire nuts
• Additional gel-filled capsules
• Drill and mounting hardware
• Tape measure
• Small cross-head screwdriver
• Pliers
• Staple gun
• Scissors
For setup and training help please visit www.petsafe.com.

How the System Works

The PetSafe Basic In-Ground Fence
®
over 3.6 kg. The system works by producing a radio signal from the fence transmitter through up to 610 m
of boundary wire. The boundary wire is buried or attached to a fixed object to enclose the pet area. You
temporarily define this pet area with boundary flags for a visual aid in training your pet. Your pet wears a
receiver collar with contact points that touch his neck, and once trained, is allowed to roam freely in the
pet area. When your pet reaches the warning zone, the receiver collar gives a warning beep. If your pet
continues into the static stimulation zone, a safe stimulation will be delivered through the contact points to
get his attention until he returns to the pet area.
Long
Contact Points
Receiver Collar with
Short Contact Points
Boundary Wire
(150 m)
• Lighter
• Shovel or lawn edger
• Wire stripping pliers
• Waterproofing compound (e.g. silicone caulk)
• PVC pipe or hose pipe
• Circular saw with masonry blade
• Non-metallic collar and lead
• Electrical tape
System has been proven safe, comfortable, and effective for pets
™
petsafe.com
Test Light
Tool
PetSafe RFA-67D-11
®
Battery
Gel-filled
Capsules
Boundary
Wire Nuts
Flags
(50)
5