Four Easy Steps For Setup; Acclimating Your Cat To The Simply Clean Litter Box System - Petsafe Simply Clean Manuel D'utilisation

Masquer les pouces Voir aussi pour Simply Clean:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Four Easy Steps for Setup

Step 1 – Take the Simply Clean
box system on a firm, flat surface. Remove the screws from the center of the Litter Bowl and top of the Conveyor
System and lift the Conveyor System. Attach the Litter Guard to the Litter Bowl allowing the notch on the Litter
Guard to fit under the Conveyor System. The Litter Guard has a small plastic tab at the other end that fits under
the lip of the Litter Bowl. Lower the Conveyor System and attach the two screws.
Step 2 – Align the Conveyor Cover with the Conveyor System and snap into place.
Step 3 – Use a recycled plastic shopping bag to line the Waste Receptacle. Insert the lined Waste Receptacle into the Simply
Clean
Litter Box System.
®
Step 4 – Fill the Simply Clean
let litter fall below the fill line. Plug in the Simply Clean
and your Simply Clean
Important: For the Simply Clean
of the unit should be on. If the indicator light is not on, check the Conveyor Cover and the Waste Receptacle to
make sure that they are aligned correctly with the unit.
Step 1
Tips:
• Spray the inside of the Litter Bowl with nonstick cooking spray to help prevent waste clumps from adhering the the surface
of the Litter Bowl.
• For additional odor control you can add a small layer of litter into the recycled plastic shopping bag before returning the
waste receptacle to the unit.
_____________________________________________________
Acclimating Your Cat
to the Simply Clean
Some cats may require an acclimation period to get used to a new litter box. Here are a few tips to help with the transition:
• Place the new Simply Clean
• Allow your cat to have access to both the old and the new litter boxes for at least a week. This time may vary based on the
temperament of your cat.
• Although the Simply Clean
unplugged for a few days to allow your cat the opportunity to use the new litter box without any distractions.
Note: You will need to manually scoop waste from the Simply Clean
new litter box.
• Allow your cat's old litter box to remain dirty. Cats prefer a clean litter box and this will make the new Simply Clean
Litter Box System more appealing.
• Once your cat is acclimated to the Simply Clean
new litter box clean and ready for use. Remove the old litter box from the area.
4
Litter Box System out of the box and remove all excess packaging material. Set the litter
®
Litter Box with premium clumping, scoopable cat litter to the designated Fill Line. Do not
®
Litter Box is ready to use.
®
Litter Box System to operate properly, the green indicator light on the side
®
Step 2
Litter Box System
®
Litter Box System next to your cat's existing litter box.
®
Litter Box System is extremely quiet while running, you may want to leave the system
®
Litter Box System, just plug in the system and your cat should find its
®
1-800-732-2677
Litter Box into a standard wall outlet. The unit is now on
®
Step 3
®
Litter Box System until your cat is fully acclimated to using the
Step 4
Minimum
Fill Line
To Wall
Outlet
Green Indicator Light
®

Publicité

Table des Matières
loading

Table des Matières