Key Definitions; Prepare The Litter Box - Petsafe ScoopFree PAL19-14656 Manuel D'utilisation

Key Definitions

Litter Box Frame: Rests on top of the Litter Tray.
Rake: Automatically sweeps solid waste into the Waste Compartment after your cat has left the Litter Box. The Rake can also be manually
operated with the Manual Button.
Detection Sensors: Detect when your cat is inside the Litter Box.
LED Indicator Light: Indicates the Litter Box is on and the status of the Rake.
Manual Button : Manually operates the Rake and returns the Rake to the Home position if it has stopped mid-cycle.
Rake Delay Button : Programs the Rake to sweep the Litter Box at 5-, 10-, or 20-minute intervals after your cat has left the Litter Box.
Count Reset Button : Resets the Health Counter back to 0.
Waste Compartment: Holds the solid waste.
Waste Compartment Lid: Attaches to the Litter Tray Waste Compartment by the Magnet Contacts to hide and keep solid waste inside the
Waste Compartment.
Litter Tray: Provides the base for the Litter Box Frame, holds the Crystal Litter, and includes the Waste Compartment. One disposable Litter Tray
with premium Crystal Litter is included with your system. Additional Litter Trays are available for purchase. Contact our Customer Care Centre or visit
our website at www.petsafe.net to locate a retailer near you.
Crystal Litter: Absorbs urine and dries out solid waste, resulting in unbeatable odour control. Note: Crystal Litter does not clump.
Privacy Hood: Provides privacy for your cat as well as increased litter containment and odour control.
Detection Sensors Rake Delay Button LED Indicator Light Manual Button
Litter Box Frame
Waste Compartment Lid
Rake
Count Reset Button
Litter Tray
Waste Compartment
Magnet Contacts
STEP 1

Prepare the Litter Box

The Litter Box is packaged for protection during shipping. Please remove all packaging material carefully. The Power Adaptor, universal tips, and the
bag of Crystal Litter are shipped within the packing material. Do not discard packaging until you complete product setup.
Find a clean, dry, and level location for your Litter Box. Connect the Power Adaptor to the Litter Box and a standard wall outlet.
Important: The Rake may move automatically when you connect power to the Litter Box. Make sure there is nothing inside the Litter Box when you
plug in the Power Adaptor.
If not at the Home position, the Rake will automatically move to it. After the Rake stops, the LED Indicator Light will light solid green.
www.petsafe.net 5
.