Safety Instructions - Conrad 75 10 59 Mode D'emploi

5. Safety instructions

The warranty is void for damages resulting from disregard of these operating instructions. We assume no
liability for consequential damages or damages to property or persons caused by improper handling or
disregard of the safety information.
We reject all liability for damages and injuries arising due to misuse, malfunction or improper handling of
the product. In these cases, the warranty is void.
• Unauthorised rebuilding or alteration of the device is not permissible for reasons of safety and approval (CE).
• The device should not be exposed to any heavy mechanical stress.
• If you are unsure as to the mode of operation, safety or connection of the units, consult a specialist.
• Only a wall outlet of the public power supply (100 – 240 V/AC, 50/60 Hz) may be used as power source for the plug-in power
supply unit. Never attempt to operate the units at another voltage.
• Make sure that all electrical connections and connecting lines between the units of the camera system and between the units
to be connected are as prescribed and in agreement with the operating instructions.
• Also follow the safety information and the operating instructions for the other units that are connected to the device.
• Live parts can be exposed when opening covers or removing parts, except when this can be done by hand. Connection
points can also be live. Before calibration, cleaning, maintenance, repair or replacement of parts or modules, the units have
to be separated from all power sources if opening the units is required. If maintenance or repair on the opened, energised
device is unavoidable, only a specialist may do this who is familiar with the dangers associated with it and the relevant
regulations.
• Never touch the plug-in power supply unit with damp or wet hands. There is danger of a life-threatening electric shock.
• Never pull on the lines of plug-in power supply units; always pull the plug-in power supply unit out of the socket only by the
enclosure.
• For safety reasons, pull the plug-in power supply unit out of the wall outlet when there is a storm.
• When installing the units, make sure that the connection cables are not crushed or damaged by sharp edges.
• Never replace faulty connection lines yourself. In such a case, separate the plug-In power supply units from the grid and
bring the units to a qualified shop.
• In commercial facilities, the accident prevention regulations of the relevant association of workers' compensation boards for
electrical systems and equipment must be complied with.
• In schools, training centres, hobby and self-help workshops, handling of electrical units is to be responsibly monitored by
trained personnel.
• If it is to be assumed that harmless operation is no longer possible, then the device is to be taken out of operation and
secured against unintentional operation. It can be assumed that safe operation is no longer possible if:
- there is visible damage on the device,
- the device no longer works,
- after longer storage under unfavourable conditions,
- after being heavily stressed during transport.
• This device is not a toy and should be kept out of reach of children.
• Maintenance, adjustment and repair work may only be done by a specialist or a qualified shop.
• If you still have questions that are not answered in these operating instructions, please contact our technical customer
service or another specialist.
15