Installation Menu - Sony VPL-GH10 Mode D'emploi

Installation Menu

The Installation menu is used for changing the installation settings.
Image Flip
Lens Control
IR Receiver
Blanking
Flips the picture on the screen horizontally and/or vertically.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Off: The picture does not flip.
Use this item for installation for the backside projection or ceiling
installation.
Avoids any operation of the lens such as "Lens Focus," "Lens
Zoom," and "Lens Shift," by mistake.
When set to "On," you can adjust the projection lens using "Lens
Focus," "Lens Zoom," and "Lens Shift." After you make this
adjustment, it is recommended that you set this item to "Off" to
avoid any operation of the lens.
Selects the remote control detectors (IR Receiver) on the front
and rear of the projector.
Front & Rear: Activates both the front and rear detectors.
Front: Activates the front detector only.
Rear: Activates the rear detector only.
This feature allows you to adjust the displayable region within
the four directions of the screen.
Select each screen edge "Left / Right / Top / Bottom" on the
Blanking adjustment screen with M / m buttons. Adjust the desired
Blanking value with < / , button.
49
GB