Setup Menu - Sony VPL-GH10 Mode D'emploi

Setup Menu

The Setup menu is used to change the factory preset settings, etc.
Setup
Status
Language
Menu Position
Cooling Setting
Cooling Setting 2
Standby Mode
Power Saving
Lamp Setting
Status
Language
Menu Position
Cooling Setting
Cooling Setting 2
46
GB
On
English
Bottom Left
Standard
Off
Standard 2
On
Sets whether or not the on-screen display is to be displayed.
Set to "Off" to turn off the on-screen displays except for certain
menus, the message displayed when you turn off the power, and
warning messages.
Set to "All Off" to turn off the on-screen displays except for certain
menus and the message displayed when you turn off the power.
(1 page 59)
Selects the language used in the menu and on-screen displays.
Available languages are: English, Dutch, French, Italian, German,
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,
Chinese (Simplified Chinese), Chinese (Traditional Chinese),
Korean, Thai and Arabic.
You can change the position to display the menu on the upper
screen.
Bottom Left: Displays the menu on the bottom left area of the
screen.
Center: Displays the menu on the center of the screen.
Use this item when using the projector at high altitudes.
High: Use this setting when using the projector at an altitude of
1,500 m or higher.
Standard: Use this setting when using the projector at normal
altitudes.
Note
When this item is set to "High," the fan noise becomes slightly
louder since the number of fan rotation increases.
Use this item only when the projector will be used in special
circumstances.
Normally, set this item to "Off."