Sony VPL-GH10 Mode D'emploi page 20

DVI
Tip
You can select the desired language for the menu screen. For details, refer to "Step 4: Selecting the
Menu Language." (1 page 24)
Tip
When "Lens Control" is set to "Off" on the Installation
position. (1 page 49)
When "Test Pattern" is set to "Off" on the Function
(1 page 48)
To adjust the horizontal position
Press </,.
The picture projected on the screen moves right or left by a maximum of 25% of the screen
width from the center of the lens.
20
GB
Flashes in green for
a while (tens of
seconds) and then
lights in green.
2
Press the / (ON/STANDBY)
? 1
switch to turn on the projector.
The ON/STANDBY indicator flashes
in green, and then lights in green.
When the ON/STANDBY indicator
flashes, "Starting..." appears on the
screen.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of
the connected equipment.
The DVI indication is displayed, and
the picture is projected on the screen.
4
Adjust the picture position.
Press the LENS button repeatedly until
the Lens Shift adjustment window (test
pattern) appears. Then adjust the
proper position by pressing the M/m/
</, buttons. Each time you press
the LENS button, the LENS adjustment
window appears in order.
menu, you cannot adjust the picture
menu, the test pattern is not displayed.