ENGLISH
IV.21. LON
(refer to parameter settings in section V.6.b.5). Connect port 2 of the master to port 1 of the LON controller.
BMS: LON
100 metres
V. PARAMETER SETTINGS
V.1. Control (integral or remote control)
The screen has 4 rows of 20 characters. It is backlit. The backlight is not permanently on must it is activated by touch. It
switches off after a period of inactivity.
There are two LEDs on the front of the screen :
%
Alarm LED with the bell symbol
!
.
Write LED with the pencil symbol
.
- Rapid flashing = the value can be modified
- Slow flashing = a password must be entered in order to modify the value
• The Up, Down, Left and Right arrows keys are used to navigate the menus.
• The Up and Down arrow keys are used to increase or reduce the value of a parameter, while the Right and Left arrow
keys are used to navigate the parameter.
• The OK key is used to enter and confirm a value, while the C key serves to cancel it.
• The alarm key (red) gives access to the predefined list.
• The left arrow is also used to exit the alarms menu and return to the main menu
• The cursors indicate the possible movements and which keys you can press.
27