Electrical Wiring; Iv.1. Electrical Power Supply; Iv.2. Vort Nrg Ec Diagram; Iv.3. Connection Of Temperature Sensors - Vortice VORT NRG 600 EC Manuel D'utilisation Et De Mise En Marche

ENGLISH
IV. ELECTRICAL WIRING

IV.1. ELECTRICAL POWER SUPPLY

Electric
motor
FIRST & PREMIUM BC
Model power
Power supply
rating
(W)
(V / Ph / Hz)
600 2 x 169W 230 / 1 / 50
800 2 x 220W 230 / 1 / 50
1500 2 x 400W 230 / 1 / 50
2000 2 x 400W 230 / 1 / 50
2500 2 x 400W 230 / 1 / 50

IV.2. VORT NRG EC DIAGRAM

IV.3. CONNECTION OF TEMPERATURE SENSORS

Except VORT NRG EC version
The temperature sensors are connected directly to the controller
• SSG : Duct supply sensor connected to Agnd(30) and AI1(31)
• SEG : Duct external sensor connected to Agnd(30) and AI1(32)
• SDG : Duct defrost sensor connected to Agnd(33) and AI1(34)
• SRG : Duct recovery sensor connected to Agnd(33) and AI1(35)
• SBD : Defrost heater battery sensor connected to Agnd(36) and AI4(37) on EH and INFINITE versions (replaced by
1030 Ohm resistance on other versions)
18
VORT NRG EC
Protection Power supply
voltage rating
(A)
2.8 230 / 1 / 50
3.4 230 / 1 / 50
8.6 230 / 1 / 50
8.6 230 / 1 / 50
8.6 230 / 1 / 50
INFINITE CO
& VORT NRG EC EH
Protection Power supply
voltage rating
(V/Ph/Hz) (A)
8.2 230 / 1 / 50
14.3 230 / 1 / 50
23.8 230 / 1 / 50
24.9 230 / 1 / 50
31.4 230 / 1 / 50
PREMIUM BE
Protection
voltage rating
(V/Ph/Hz) (A)
8.2
11.0
19.5
24.9
31.4
TH1= External temperature for heat recovery via
heat exchanger (factory setting: 18°C)
TH2= External temperature for cold recovery via
heat exchanger (factory setting: 24°C)
TH3= Temperature of emission for defrost via
bypass (factory setting: 5°C) -> Do not change this
setting
INFINITE BE
Power supply Protection
voltage rating
(V/Ph/Hz) (A)
230 / 1 / 50 13.7
230 / 1 / 50 21.9
230 / 1 / 50 34.7
400 / 3+N / 50 15.1
400 / 3+N / 50 19.5