Installation; Mounting The Sensor; Connection; Connecting The Sensor To A Ak9 Cable - Mettler Toledo InPro Serie Instructions D'utilisation

InPro 6850 i / 6900 i / 6950 i O
4

Installation

4.1

Mounting the sensor

a
Important! Remove the protection cap before
mount ing the sensor.
Mounting the sensor in a housing
Please refer to the instruction manual of your hous-
ing explaining on how to mount the sensor in place.
Mounting the sensor directly on a pipe or a vessel
The 12 mm sensors can be mounted directly through
a socket with inside thread Pg 13.5 and securely
tightened via the Pg 13.5 threaded sleeve.
15°
4.2

Connection

4.2.1 Connecting the sensor to a AK9 cable

h
The sensor is connected to the transmitter via a AK9
cable. The AK9 cable ensures a secure connection
between the transmitter and the sensor under harsh
industrial conditions. The robust watertight IP 68
connector housing guarantees maximum process
safety.
a
Do not touch the sensor at the AK9 connector plug!
Tightly screw the plug to fasten the two parts.
© 04 / 13 Mettler-Toledo AG
Printed in Switzerland
Sensor 12 / 25 mm
2
Admissible mounting position
Zulässige Einbaulage
Positionement de montage admis
52910094ME
Inadmissible angle
Unzulässiger Winkel
Angle non admissible
InPro 6850 i / 6900 i / 6950 i
15
15°
52 206 349